WRAPPING WITH SEMI-AUTOMATIC WORKING CYCLE

diameter rotary table: 1500 mm.
speed 'Rotation (rpm min./1'): 10
max. (Kg.): 1000
fascettabile maximum pallet width (mm.): 1200
maximum pallet length fascettabile (mm.): 1200
fascettabile maximum pallet height (mm.): 2000
diameter max. film reel (mm.): 300
max height. film reel (mm.): 500

installed power (kW): 0.4
Standard voltage: 380V 3-ph + n
Machine weight (kg.): 360

transmission film carriage through chain mechanical clutch control tension film hand up button / down film carriage
rotary table open for the deposit / picking pallet with pallet truck pallet entry safety photocell (filming patent) Inverter for soft start and stop rotating table position Microprocessor control panel with digital buttons . Rise + Fall wrapping cycle wrapping cycle only in ascent cycle arrest cart with rounds reinforcement separate programming number of the lower rpm and higher reset button for the repositioning of the trolley, pallet reading photocell with different heights column hinged to the frame by a rapid assembly

 Optional :
> upgrade to 2000kg max.load
> upgrade to 1800mm rotate table

WRAPPING WITH AUTOMATIC WORKING CYCLE

diameter rotary table: 1500 mm
speed rotating platform: 10 rev / min
max. platform: 1500 kg
max size. pallet: 1200 x 1200 x 2000/2450 mm
max height. film reel used: 500mm
diameter max. film reel: 300 mm  

installed power: 0.4 kw
standard voltage: 380 v - 50 hz - 3phase
Machine weight: 360 kh

special version fp / 10 with ultra-series:
inverter for start, stop and position adjustment turntable speed
transmission film carriage via a belt
mechanical clutch for adjustment of the tension of the film  
Microprocessor control panel with digital buttons with three wrapping programs
Rise + Fall wrapping cycle
wrapping cycle only in ascent
wrapping cycle in manual
separate programming number of the lower rpm and higher
reset button for the repositioning of the film carriage and turntable
photocell for automatic reading of the height of the load to be wrapped

 Optional :
> upgrade to 2000kg max.load
> upgrade to 1800mm rotate table


 

WRAPPING ROBOT WITH AUTOMATIC WORKING CYCLE

No. 2 batteries of 12 volt electric drive maintenance-free gel
Built-in battery
max length and width. Load: no limitation
max height. Load: according to the specifications of the machine
max height. film reel used: 500mm
diameter max. film reel: 300 mm
cycles of winding without need 'charging: approx 250/300, depending on the size of the load and the set work cycle

standard voltage: 220 volts single phase
Machine weight (including battery): 350 kg

transmission film carriage via a belt  
photocell for automatic reading of the height of the load to be wrapped
electromagnetic clutch for adjustment of the tension of the film
microprocessor control board with digital push buttons for adjustment of the parameters and the selection of the optimal working cycle between the following 4 series available:
* Standard wrapping cycle (ascent + descent)
* wrapping cycle only during ascent of the reel carriage
* wrapping cycle only during ascent of the carrier trolley with a stop for positioning a protective cap on the top of the pallet with 4 free sides
* standard wrapping cycle (ascent + descent) with a stop for positioning a protective cap on the top the pallet, with 4 open sides
diagnostics for faults or alarms
selector for manual or automatic wrapping cycle
separate programming number of the lower rpm and higher
inverter for start / soft stop and speed adjustment 'of rotation
speed 'of translation of the carriage adjustable coil carrier, through inverter
Rudder with buttons for manual handling (forward / backward) of the machine
Front safety device / Emergency
indicator (display) of the battery charge level
possibility 'of the robot transport without battery removal
possibility 'of use of the machine in the workplace particular (without limitation specifications)  
with IP54 protection motors

 

WRAPPING ROTATING ARM WITH AUTOMATIC CYCLE OF WORK FP650: VERSION COLUMN MOUNTED SUPPORT FP650 VERTICAL / P: PREPARED VERSION FOR WALL MOUNT

Rotation speed: 15 revolutions / min max.
transmission film carriage via a belt
Basket equipped with powered pre-fixed ratio of 200% (1 m = 3 m)
size max. load: 1200 x 1200 mm
max height. load: 2200 mm
weight max. Load: no limitation

standard voltage: 380 v - 50 Hz - 3-phase + neutral

photocell for automatic reading of the height of the load to be wrapped
separate programming number of the lower rpm and higher
Cycle startup sound
Machine light signal in operation
Safety device for emergency stop of the rotating arm  
stop in the position of the arm at the end of the wrapping cycle
control panel integrated in the column for the fp650 model and external, in the console, for the model fp650 / p
group rotation kinematic belt and brake motor
speed rotation arm and acceleration / deceleration controlled by inverter